How To Measure Tier Curtains

Measure the exact length that you desire your valance or tier curtain to be from the rod down. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window if not more - sheers can be 3 times the window width to achieve a look of proper fullness.

Pin On Kitchen Curtains

Measure the height from the floor to the top of the door frame on the right side and the left side.

How to measure tier curtains. Measure the drop from your curtain pole or track. The headings at the top and bottom. There are 2 curtains included within each pack.

If youre buying curtains with eyelets or tab tops measure from the top of the pole to allow for. Add 2 inches for the seam allowance. Kitchen tier curtains are also referred to as café curtains and can be used in bedrooms family rooms basement boat windows or anywhere a half curtain.

Just measure the length you want your curtain to be and add 15 inches on each end three inches total. Tier curtains in their standardized variant also come in panels that are mostly 45 inches or around 115 cm wide and reach in length 24 or 36 inches or 61 and 92 cm respectfully however with a little more research you can find these curtains in the other widths. To arrive at the proper length for your curtain measure from the top of moulding not the glass or top of rod if rods are already in place to the point where you want the bottom of your curtain to be.

Measure the width of the glass area you are covering as well as the length. Then add an additional 6 inches to the length which will accommodate approximately 2 inches of material above the rod and the rod pocket. We offer a wide selection of kitchen and tier curtains available in many decorative prints and colors for your kitchen window treatment needs.

HVERSAILTEX White Curtains for. Door panels and sidelights are measured from the top rod pocket to the bottom rod pocket. Measuring Length To arrive at the proper length for your curtain if rods are already in placemeasure from the top of curtains rod to the floor if you do not want the curtains to touch the floor measure to the point where you want the bottom of your curtain to fall If no rod is installed Start length measurement where you want the Rod hung.

Measure the width of the rod from left to right.

Pin On Project